|
CP-3
®, CP-5®, and CPA CO Combustion Promoters |
| To submit a request for a Combustion Promoter Usage Estimate, click
here |
| Technology
Summary: |
| Grace Davison, the
first to commercialize catalytic CO combustion technology, has been a leader in CO
combustion promoters since this technology was introduced to the refining industry in the
mid-1970's. |
| Grace Davison
manufactures its own proprietary alumina support. This capability allows Davison to
optimize the base physically for maximum retention as well as catalytically for maximum
activity. The unsurpassed attrition resistance of Davison combustion promoters assures
that the maximum amount of promoter is retained in the unit. Since CO promoters are always
most active in their fresh state, the greater the percentage of additive retained when
first introduced to the FCCU, the better the activity response. |
| CP-3, an industry
standard for many years, combines Grace Davison's attrition-resistant alumina support with
high concentrations of noble metal. As a result, CP-3 provides maximum initial activity as
well as excellent resistance to poisoning by contaminants such as lead and antimony. |
| CP-5 contains an
intermediate concentration of noble metal and is suitable for units requiring greater
dispersion of platinum throughout the FCC circulating inventory. CP-5 is an excellent
"all-purpose" CO promoter. |
| CPA provides high
platinum stability at minimum cost. The high-stability CPA base allows moderate amounts of
noble metal to be used since the rate of promoter deactivation is greatly reduced. CPA is
suitable for units requiring maximum dispersion of platinum in the circulating inventory. |
|
| Typical
Properties: |
| |
CP-3 |
CP-5 |
CPA |
- Particle Size Distribution, wt%
- 0 - 20 microns, wt%
- 0 - 40 microns, wt%
- APS, microns
|
0
8
75 |
0
8
75 |
0
8
75 |
| Davison Index |
5 |
5 |
5 |
| ABD, g/cc |
0.85 |
0.85 |
0.85 |
| Platinum Content, PPM |
830 |
520 |
330 |
|
| The physical
properties listed above, especially the low fines content and excellent attrition
resistance, insure that Davison promoters stay in the FCC unit. |
| Packaging: |
- Bagged: 5 or 10 lb bags (packed in 40 lb pails or 200 lb
steel drums)
- Bulk: 40 lb pails or 200 lb steel drums
- 1 ton flow bins
- Preblended with fresh catalyst shipments
|
| Technical
Service: |
- Selection of the optimal usage rate
- Assistance during additive testing
- Monitoring unit performance
- Analyzing equilibrium catalyst during the test period
- Injection system equipment
|
|
| The information
contained herein is based upon our testing and experience and is believed to be accurate.
Since operating conditions may vary and since we do not control such conditions, we must
disclaim any warranty, express or implied, with regard to results to be obtained from the
use of our products or with regard to application of Davison techniques. |
